Dab Rite Digital IR Thermometer - LE Purple - Grateful For Dabs - Glow in the Dark
Introducing The Grateful For Dabs edition Dab Rite, designed by Brian Morgante of Flesh & Bone Design
Brian was first a touring musician that through necessity found design as a new outlet for his artistic ideas. Brian hails from the shores of Lake Erie in a small rust-belt town that taught the importance of community over competition, which is a core ethos at Dab Rite. Each Dab Rite includes a matching microfiber cleaning cloth for your dabbing convenience.
- Includes a purple microfiber cleaning cloth for your dabbing convenience
- Light & Sound Alerts
- Built-in Emissivity Settings
- LED Guide Light
- Automatic Shut-off After 5 Minutes of No Use
- Comes with Black Silicone Sensor and Cap Holder Covers
- Limited Edition – Each unit is numbered
US Patent No. 11,187,586
WHAT’S IN THE BOX:
- 1 x Dab Rite ™ Unit
- 1 x Purple Dab Rite Microfiber Cleaning Cloth
- 1 x Carrying Case
- 1 x User Guide
- 1 x USB-C Charging Cable
- 1 x Silicone Carb Cap Cover
- 1 x Silicone Sensor Cover
- 1 x Limited 6 Month Warranty
The latest and greatest temp device on the market!!! If you're looking for perfect temp dabs, this is what you want! Bendable arm to fit temp sensor under any angle banger. The Dab Rite has absurdly good accuracy, and battery life you will not believe!
Words from the DabRite team on their LEGENDARY product
The Dab Rite was designed with concentrate connoisseurs in mind. We sourced the highest grade industrial sensor, not designed for human use, but specifically created for high heat readings in manufacturing settings. This resulted in a sensor that is a fraction of the size of most others on the market. Because we know that no banger is the same, we made sure our sensor was calibrated with a variety of emissivity settings, so you can experiment until you’ve found your perfect setting. The heat sensing component is covered by a silica lens and housed under a brass barrel to optimize its sensing capabilities while also protecting against potential dabbing hazards. This sensor is calibrated to read between 200-800°F and should only be used to measure the temperature of quartz.
The placement of the sensor is crucial to taking the perfect dab. Due to the sensors small size and accuracy, the top of the sensor covered in silicone should be a minimum of .5” away from the bottom of the banger and a maximum distance of 1.5” for the best reading.
The LED guide light is there to assist in making sure the sensor is centered under your banger. The LED should line up with the outer edge of the banger, illuminating it blue. When looking through the banger, the sensor should be in the middle of the banger for the best accuracy.
We encourage you to all experiment with various methods and choose what works best for you. Many dabbers out there are using inserts and Terp Slurpers and have found the perfect temperatures using the Dab Rite in creative ways.
If any debris or oils falls down the brass tube, use a small piece of a q-tip and a small amount of isopropyl alcohol to clean it out immediately. If you use a slurper and have any splashing, we recommend moving the Dab Rite away from the banger before taking your dab to minimize risk of oil getting down the tube.